INSPECTION DURING REMOVAL, DISASSEMBLY
• When removed, each part should be carefully
inspected for malfunction, deformation, damage,
and other problems.
End Of Sie
ARRANGEMENT OF PARTS
• All disassembled parts should be carefully
arranged for reassembly.
• Be sure to separate or otherwise identify the parts
to be replaced from those that will be reused.
End Of Sie
CLEANING OF PARTS
• All parts to be reused should be carefully and
thoroughly cleaned in the appropriate method.
Warning
• Using compressed air can cause dirt and
other particles to fly out causing injury to
the eyes. Wear protective eye wear
whenever using compressed air.
End Of Sie
REASSEMBLY
• Standard values, such as torques and certain
adjustments, must be strictly observed in the
reassembly of all parts.
GI–14
FUNDAMENTAL PROCEDURES
A6E201400004W08
X3U000WAM
A6E201400004W09
X3U000WAN
A6E201400004W10
WGIWXX0030J
A6E201400004W11
WGIWXX0031J