Mazda 2002 6 Workshop Manual page 55

Crankshaft Pulley Lock Bolt Removal Note
1. Remove the cylinder block lower blind plug.
2. Install the SST.
3. Turn the crankshaft clockwise the crankshaft is in
the No.1 cylinder TDC position.
4. Hold the crankshaft pully by using the SSTs.
Chain Tensioner Removal Note
1. Using a thin screwdriver, hold the chain tensioner ratchet lock mechanism away from the ratchet stem.
2. Slowly compress the tensioner piston.
3. Hold the tensioner piston using a 1.5 mm {0.059
in} wire or paper clip.
No.3 Engine Mount Rubber and No.3 Engine Joint Bracket Removal Note
1. Suspend the engine using the SSTs.
B–12
TIMING CHAIN
AME2212W004
AME2215W002
AME2215W003
AME2215W004