Rear Oil Seal; Rear Oil Seal Replacement - Mazda Mazda6 Workshop Manual Supplement

REAR OIL SEAL REPLACEMENT

1. Remove the flywheel. (See
models).)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
.
1

Rear oil seal

(See B2–26 Rear Oil Seal Removal
(See B2–26 Rear Oil Seal Installation
Rear Oil Seal Removal Note
1. Cut the oil seal lip using a razor knife.
2. Remove the oil seal using a screwdriver protected
with a rag.
Rear Oil Seal Installation Note
1. Apply clean engine oil to the oil seal lip.
2. Push the oil seal slightly in by hand.
3. Tap the oil seal in evenly using the SST and a
hammer.
End Of Sie
B2–26
REAR OIL SEAL
REAR OIL SEAL
H–5 CLUTCH UNIT REMOVAL/INSTALLATION (A65M-R manual transaxle
Note)
Note)
OIL SEAL LIP
HAMMER
49 G033 107A
A6E232211399201
OIL OIL SST
R
A6E2322W100
A6E2322W101
RAG
A6E2322W102
REAR COVER
0—0.5 mm
{0—0.019 in}
REAR OIL SEAL
A6E2322W103