Hose Clamps; Torque Formulas; Vise - Mazda 2002 6 Workshop Manual

HOSE CLAMPS

• When reinstalling, position the hose clamp in the
original location on the hose and squeeze the
clamp lightly with large pliers to ensure a good fit.
End Of Sie

TORQUE FORMULAS

• When using a torque wrench-SST or equivalent
combination, the written torque must be
recalculated due to the extra length that the SST
or equivalent adds to the torque wrench.
Recalculate the torque using the following
formulas. Choose the formula that applies to you.
Torque Unit
N·m
kgf·m
kgf·cm
ft·lbf
in·lbf
A : The length of the SST past the torque wrench drive
L : The length of the torque wrench
End Of Sie

VISE

• When using a vise, put protective plates in the jaws of the vise to prevent damage to parts.
End Of Sie
GI–16
FUNDAMENTAL PROCEDURES
Formula
N·m × [L/(L+A)]
kgf·m × [L/(L+A)]
kgf·cm × [L/(L+A)]
ft·lbf × [L/(L+A)]
in·lbf × [L/(L+A)]
A6E201400004W14
WGIWXX0035J
A6E201400004W19
WGIWXX0036E
A6E201400004W16
X3U000WAW