Drive Belt; Drive Belt Inspection; Drive Belt Replacement - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Table of Contents

• Front and water pump drive belt deflection/tension inspection is not necessary because of the use of the

front drive belt auto tensioner.

Front Drive Belt

1. Verify that the drive belt auto tensioner indicator

mark does not exceeds the limit.

• If it exceeds the limit, replace the drive belt.

(SeeB–3 DRIVE BELT

1. Remove the splash shield (RH).

2. Turn the center of the tensioner pulley clockwise

to release tension to the drive belt.

3. Remove the drive belt.

4. Reinstall the drive belt or install a new drive belt.

5. Verify that the drive belt auto tensioner indicator

mark does not exceeds the limit. (See

INSPECTION.)

• If it exceeds the limit, replace the drive belt.

6. Install the splash shield (RH).

DRIVE BELT

REPLACEMENT.)

A6E221015800W01

A6E221015800W03

Table of Contents