Oil Seal (Output Shaft) - Mazda 1990 323 Workshop Manual Supplement

M
REAR DIFFERENTIAL
03UOMX-842
I
LATERAL LINK
I
TRAIUNG LINK
03UOMX-843
I
03UOMX-844
03UOMX-845
OIL SEAL (OUTPUT SHAFT)
Replacement
1 I Jack up the vehicle and support it with safety stands.
2. Drain the differential gear oil.
Note
l
Mark the driveshaft and output shaft flanges for
proper reassembly.
3. Separate the driveshaft from the differential, and suspend
it as shown in the figure.
4. Remove the lateral link.
5. Remove the trailing link.
6. Pull the wheel hub out to separate the driveshaft from the
output shaft.
7. Remove the output shaft with two pry bars as shown in the
figure.
8. Remove the oil seal with a screwdr .iver.
9. Apply lithium-base grease to the new oil seal lip and install
it with the SST.
03UOMX-846