On-Board Diagnostic [Audio; Starting Procedure For On-Board Diagnostic Test Mode; Supplier Identification Procedure - Mazda 2002 6 Workshop Manual

Hide thumbs Also See for 2002 6:

Workshop manual (1187 pages)

Bodyshop manual (116 pages)

Table of Contents

• All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order

1. Turn the ignition switch to the ACC or ON position.

2. First press the POWER button, then

simultaneously press the AM button and TAPE/

MD button for 2 seconds or more.

TAPE/MD button

SEEK button (type A)

SEEK button (type B)

POWER button (type A)

POWER button (type B)

• If several DTCs are in the memory, they can

be displayed by the SEEK button.

3. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.

• When asking the supplier (service center) for repair or replacement, verify which supplier the module

belongs to and enter in the Audio Repair Order Form.

Identification With Printed Numbers/Label

1. Remove the audio unit.

2. Verify the supplier name written on the label attached on each module.

Identification With On-board Diagnostic Test Mode

1. Start the on-board diagnostic test mode.

2. Verify the part number and supplier code

displayed in the LCD.

• When no DTCs are in the memory, part

numbers and supplier codes will not be

Cassette deck (lower module)

CD player (upper module)

CD changer (external type)

CD changer (upper module)

MD player (lower module)

Supplier code