Configuring The Management Settings - 3Com V7122 User Manual

Click the Activate Rule button; the rule is active.
2
To de-activate an activate rule:
Click the radio button of the entry you want to activate.
1
Click the DeActivate Rule button; the rule is de-activated.
2
To delete a rule:
Click the radio button of the entry you want to activate.
1
Click the Delete Rule button; the rule is deleted.
2
To save the changes so they are available after a power fail, see
3
Configuring the Certificates
Use the Certificates screen to replace the server (see
client (see Client Certificates) certificates and to update the private key
(HTTPSPkeyFileName, described in
Configuring the IPSec Table
Use the IPSec Table screen to configure the IPSec parameters. For detailed information on
IPSec and IKE, see IPSec and
Configuring the IKE Table
Use the IKE Table screen to configure the IKE parameters. For detailed information on
IPSec and IKE, see IPSec and

Configuring the Management Settings

From the Management Settings you can:
Configure the Syslog Settings.
Configure the SNMP Managers Table (see
Configure the SNMP Community Strings (see
Strings).
SNMP v3 Users (see
Configuring the SNMP Managers Table
The SNMP Managers table allows you to configure the attributes of up to five SNMP
managers.
120
Table 37).
IKE.
IKE.
Configuring the SNMP Managers
Configuring SNMP v3 Users).
Saving
Server Certificate Replacement) and
Configuring the SNMP Community
V7122 GatewayUser Guide
Configuration.
Table).