Gestetner B070 Service Manual page 1204

SERVICE PROGRAM MODE TABLES
SP
5840 011 WEP Key Select
020 WEP Mode
5841 Supply Name Setting
001 Toner Name Setting: Black
005 Staple Standard
006 Staple Bind
5842 Net File Analysis Mode Setting
5844 USB
001 Transfer Rate
002 Vendor ID
003 Product ID
004 Device Release Number
5845 Delivery Server Setting
001 FTP Port No.
002 IP Address
B070/B071
CÓPIA NÃO CONTROLADA
Number/Name
5-44
CÓPIA NÃO CONTROLADA
Function/[Setting]
Selects the WEP key.
[00~11 / 00 / 1 binary]
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved
11: Key #4 (Reserved
These names appear on the Inquiry list
(the user can print this by pressing the
Counter key on the operation panel, then
touching 'Print Inquiry List' on the screen).
Enter the name of the toner in use.
Enter the name of the staples in use for
normal stapling (not booklet stapling)
Enter the name of the staples in use for
booklet stapling.
Selects each debut output mode for
NetFile processing
NetFiles: Jobs printed from the document
server using a PC and DeskTopBinder
[8 bits / 0011 1111 / Bit SW]
Bit 8 is reserved. Bit 7 is the debug output
switch for each mode.
Sets the speed for USB data transmission.
[0x01~0x04 / 0x04 / 0]
0x01: Full Speed (Fixed)
0x04: High Speed/Full Speed (Automatic
change)
Sets the vendor ID:
DFU
[0x0000~0xFFFF/0x05CA/1]
Initial Setting: 0x05CA Ricoh Company
Sets the product ID. DFU
[0x0000~0xFFFF/0x0403/1]
Sets the device release number of the
BCD (binary coded decimal) display.
DFU
[0000~9999/0100/1]
Enter as a decimal number. NCS converts
the number to hexadecimal number
recognized as the BCD.
Provides items for delivery server settings.
Sets the FTP port number used when
image files to the Scan Router Server.
[0~65535 / 3670 / 1]
Use this SP to set the Scan Router Server
address. The IP address under the transfer
tab can be referenced by the initial system
setting.
[0~0xFFFFFFFF / 0x00]
Rev. 06/2004
SM