Netfile Firmware; Netfile Firmware History - Gestetner B070 Service Manual

Firmware History for B070/B071

NETFILE FIRMWARE:

PART NUMBER
B0705736
B0705756
A
B
D
E

NETFILE FIRMWARE HISTORY:

1st Mass Production
1. Supports 0-counter change
2. Supports SMTP Authentication
Modified for use with Copy Connector Kit.
Modified for use with the MLB option (File Format Converter).
IMPORTANT: To ensure the symptoms listed below do not occur, it is also necessary to
update to the following firmware version or later:
•
System Version V.4.03.3 (B0705754D)
1. Image data to which a new section has been added, does not appear correctly after
sending the data to the MFP HDD from Desk Top Editor for Production.
2. Excel data set at 1200 dpi does not appear correctly after being retrieved from the
MFP HDD to Desk Top Editor for Production.
3. A device error occurs when send the data that contains Printer document and Copier
document to the MFP HDD from Desk Top Editor for Production.
IMPORTANT: To ensure the symptoms listed below do not occur, it is also necessary to
update to the following firmware version or later:
•
System Version V.4.04.1 (B0705754E)
1. Modified for use of the EB-105EX in combination with Desk Top Editor for Production.
2. Cannot retrieve a 1200dpi document from the HDD to Desktop Editor for production using
TIFF 100% if the file contains blank page(s).
CÓPIA NÃO CONTROLADA
VERSION CHECK SUM
V1.01
V2.11.3
V3.04.2
V3.07.2
V.3.08
V.3.09
Symptom Corrected
CÓPIA NÃO CONTROLADA
PRODUCTION
- 1st Mass Prod.
BF73 April '03 Prod
45DA May '03 Prod
79ED June '03 Prod
D929 September '03 Prod
33C9 November '03 Prod
Version
B0705736
B0705756
A
B
D
E
Page 10 of 12