Show Ip Igmp Snooping Groups - Dell S6100 Configuration Manual

Version
E-Series legacy
command
Usage Information This command enables the IGMP switch to send General Queries periodically. This behavior is useful when there is
no multicast router present in the VLAN because the multicast traffic is not routed. Assign an IP address to the
VLAN interface for the switch to act as a querier for this VLAN.

show ip igmp snooping groups

Display snooping related information for all the IGMP groups, interface or one group of one interface.
Syntax show ip igmp snooping groups [group-address [detail] | detail | interface
[group-address [detail]]]
Parameters
snooping
group-address
interface
detail
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
660 Internet Group Management Protocol (IGMP)
Description
Enter the keyword snooping to display snooping related information.
(OPTIONAL) Enter the group address in dotted decimal format to view information on
that group only.
(OPTIONAL) Enter the interface type and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
• For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
• For a port channel interface, enter the keywords port-channel then a number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
(OPTIONAL) Enter the keyword detail to display the IGMPv3 source information.
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.