Telnet - Dell PowerConnect 8024 Cli Reference Manual

Example
The following example displays how to reconfigure switch number "1" to an identifier of "2."
console(config)#switch 1 renumber 2

telnet

Use the telnet command in Privileged EXEC mode to log into a host that supports Telnet.
Syntax
ip-address hostname
telnet { |
ip-address — Valid IP address of the destination host.
•
hostname — Hostname of the destination host. (Range: 1–158 characters)
•
port — A decimal TCP port number, or one of the keywords from the port table in the usage
•
guidelines (see "Port Table" on page 1108).
keyword — One or more keywords from the keywords table in the user guidelines (see
•
"Keywords Table" on page 1107).
Default Configuration
port —
Telnet port (decimal 23) on the host.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#telnet 1.1.1.1?
Keywords Table
Options Description
debug Enable telnet debugging mode.
line Enable telnet linemode.
<cr> Press ENTER to execute the command.
<port> Enter the port number.
port keyword1......
} [ ] [ ]
System Management Commands
1107