Stack - Dell PowerConnect 8024 Cli Reference Manual

Example
The following example displays a system version (this version number is only for demonstration
purposes).
console>show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
------------------------------------------------------------------
unit
-----------------------------------------------------------------
1

stack

Use the stack command in Global Configuration mode to set the mode to Stack Global Config.
Syntax
stack
Default Configuration
This command has no default mode.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the mode to Stack Global Config.
console(config)#stack
console(config-stack)#
1104
System Management Commands
image1 image2
3.1.0.15 0.0.0.0
current-active
image1
next-active
image1