Primed Version; Incoming Goods - Siemens SINAMICS G115D Operating Instructions Manual

12.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
12.1.3.3

Primed version

Primer according to corrosiveness category
Paint system
Unpainted corrosiveness category C1
Cast iron parts immersion primed,
steel parts primed or zinc-plated,
aluminum and plastic parts untreated
Paint system
Primer according to corrosiveness category C2 G
2‑component epoxy zinc phosphate,
specified coat thickness 60 μm
Paint system
Primer according to corrosiveness category C4 G
2‑component epoxy zinc phosphate,
desired coat thickness 90 μm
12.1.4

Incoming goods

NOTICE
Transport damage impairs correct functioning
Do not commission faulty gearboxes or geared motors.
Note
Do not open or damage parts of the packaging that preserve the product.
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Additional information on the SIMOGEAR geared motor
Can be overpainted with
• Synthetic paint, synthetic resin paint, oil paint
• 2‑component polyurethane paint
• 2‑component epoxy paint
Can be overpainted with
• 2‑component - polyurethane paint
• 2‑component - epoxy paint
• 2‑component - acrylic paint
• Acid-hardening paint
Can be overpainted with
• 2‑component - polyurethane paint
• 2‑component - epoxy paint
• 2‑component - acrylic paint
• Acid-hardening paint
431