Siemens SINAMICS G115D Operating Instructions Manual page 64

Wiring
5.7 Overview of the converter interfaces
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Available on the wall-mounted converter only.
1)
The fan connector is designed for use in the wall-mounted converter FSB (4 kW)/FSC.
2)
Optionally available on the wall-mounted converter only.
3)
Not available on the AS-i variant.
4)
Note
The electromechanical potentiometers, the repair switch, and the local/remote control panel on
the converter do not provide protection against unauthorized access. You must take appropriate
measures to protect the converter against unauthorized operation or changes to the settings.
62
Line supply interface (IN) - X1
Line supply interface (OUT) - X3
24 V DC power supply interface (IN) - X01
24 V DC power supply interface (OUT) - X02
PROFINET communication - X150 P1 and P2
(for PROFINET variant only)
Digital inputs DI 0 and DI 1 - X07
Digital inputs DI 2 and DI 3 - X08
Bidirectional digital inputs/outputs DIO 24
and DIO 25 - X05
Motor power interface - X2
⑩
External braking resistor interface - X4
⑪
Fan unit connector
⑫
Status LED
4)
⑬
Commissioning interface, including a mini-
4)
USB interface and two electromechanical po‐
tentiometers P1/P2
⑭
Memory card interface
⑮
Repair switch
⑯
Local/remote control panel
⑰
AS-i communication and auxiliary power -
X03 (for AS-i variant only)
Protective earth on the converter housing
1)
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
2)
1)3)
1)3)
SINAMICS G115D Wall Mounted distributed drive