Use For The Intended Purpose; General Technical Description - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
12.3 Specific data gearbox
Siemens reserves the right to change individual components and accessories in the interest
of ongoing development. The changes are designed to improve performance and safety. The
significant features are retained. The operating instructions are updated regularly with new
contents.
The latest versions of the operating instructions, the declaration of incorporation and the
declarations of conformity are available in electronic form in the Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/13424/man).
12.3.2

Use for the intended purpose

The SIMOGEAR gearboxes described in these operating instructions have been designed for
stationary use in general engineering applications.
Unless otherwise agreed, the gearboxes have been designed for use in plants and equipment
in industrial environments.
The gearboxes have been built using state-of-the-art technology and are shipped in an
operationally reliable condition. Changes made by users could affect this operational
reliability and are not permissible.
Note
The data on the rating plate assumes an installation altitude of up to 1 000 m above sea level.
The permissible ambient temperature is stamped on the rating plate.
For different installation altitudes and ambient temperatures, contact Technical Support.
The gearboxes have been designed solely for the application described in the Technical data
(Page 439). Do not operate the gearbox outside the specified power limit. Other operating
conditions must be contractually agreed.
Do not climb on the gearbox. Do not place any objects on the gearbox.
12.3.3

General technical description

The gearbox is supplied with one, two or three transmission stages.
The gearbox is suitable for various mounting positions. Observe the correct oil level.
Gearbox housing
The housings for frame sizes 19 and 29 are made of die-cast aluminum.
480
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA