Corner Turntable Lift, Two Positions And Two Speeds (P3393 = 10) - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Advanced commissioning

7.9 Conveyor technology control functions (for G115D PROFINET and AS-i variants only)

Corner turntable lift, two positions and two speeds (p3393 = 10)

With p3393 (conveyor technology application) set to 10, the converter enables a corner

turntable lift in a conveyor system to move up and down with variable speeds and stop at two

dedicated positions. Four sensors are required to signal the limit positions for the motor to stop

or decelerate.

Precondition

• You interconnect the signals of the sensors with the digital inputs of your choice.

• To make sure that the corner turntable lift moves between the higher position and the lower

position, the end position shutdown must be activated with p3392 set to 1.

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA