Unpacking; General Information Concerning The Installation - Siemens SINAMICS G115D Operating Instructions Manual

12.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
12.1.6

Unpacking

NOTICE
Transport damage impairs the correct function of the geared motor
Never commission faulty or defective geared motors.
Check the geared motor for completeness and for damage. Report any missing parts or
damage immediately.
Remove and dispose of the packaging material and transport equipment in compliance with
regulations.
12.1.7

General information concerning the installation

Assembly work with the system under load
Under load, the system can start or reverse in an uncontrolled fashion.
The entire system must be load-free so that there is no danger during this work.
NOTICE
Destruction caused by welding
Welding destroys the geared parts and bearings.
Do not weld on the gearbox. The gearbox must not be used as a grounding point for welding
operations.
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Keep dry
Keep cool
WARNING
Additional information on the SIMOGEAR geared motor
Attach here
433