Rating Plate For Geared Motors With Sinamics G115D Motor Mounted - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
12.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
This data, together with the contractual agreements for the geared motors, determines the
limits of intended use.
In the case of geared motors, a rating plate attached to the motor indicates the data for the
entire drive.
In certain cases separate rating plates are attached to the gearbox and the motor. Maintain
the operating ranges and power limits on all rating plates.
The degree of protection according to EN 60034‑5 (IEC 60034‑5) specified on the nameplates
only applies to the motor of the unit.
When selecting higher degrees of protection, also take into consideration the equipping on
the gearbox side (seals, vents).
12.1.14.4

Rating plate for geared motors with SINAMICS G115D Motor Mounted

Figure 12-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
442
SIEMENS
Example of a rating plate for geared motors with SINAMICS G115D Motor Mounted
Equipment name
Article number, MLFB
Dxx - MLFB option of the mounting position
Vxx - MLFB option for the converter connector
Factory identification number (FID)
Type designation
Data matrix code
IE class (according to IEC TS 60034-30-2)
Permissible ambient temperature
Reference to operating instructions
Customer ID
Transmission ratio i
Speed range SR
Gearbox output speed range in rpm
Geared motor rated output torque in Nm
Oil quantity in l, oil type, oil viscosity ISO VG class according to DIN 51519 / ISO 3448
M4 braking torque in Nm, cyclic duration factor
Mounting position
Weight in kg
Thermal motor protection
SIEMENS
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA