Installation Conditions For The Motor - Siemens SINAMICS G115D Operating Instructions Manual

In the case of storage in transit over 6 months, special arrangements must be made for
preservation. Contact the Technical Support.
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature.
The storage location must be vibration- and shock-free.
The free shaft ends, sealing elements and flange surfaces must have a protective coating.
Do not store the geared motor on the fan cover.
Storage up to 36 months (optional)
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature. Special packing is then not necessary.
If such premises are not available, pack the gearbox or the geared motor in plastic film or
air-tight sealed film and materials. The films and materials must be able to absorb moisture.
Cover them to provide protection against heat, direct sunlight and rain.
The permissible ambient temperature is -25 °C to +50 °C.
The life of the corrosion protection is 36 months from delivery.
12.2.8

Installation conditions for the motor

NOTICE
Risk of overheating due to insufficient cooling
Protect intake and discharge openings against blockages and coarse dust.
The cooling air must flow unimpeded into the air intakes and flow out through the air outlets.
Exhaust air should not be drawn back in again.
Motor Mounted
Figure 12-6
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Minimum clearance of motor with G115D from wall for air intake
Additional information on the SIMOGEAR geared motor
Wall Mounted
>x
12.2 Specific data motor
>x
451