Siemens SINAMICS G115D Operating Instructions Manual page 511

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Figure 12-30

1. Assemble the mounting kit

2. Screw on the tank with the screwed connection

housing or of the motor bearing shield.

3. Align the oil expansion unit so that it is vertical.

Oil expansion unit size 109

The hose of the oil expansion unit is subject to a natural aging process.

Check the hose for tears or leaks.

Never commission a leaky hose. Replace the hose.

The hose of the oil expansion unit is not suitable for ambient temperatures below ‑25 °C.

If the ambient temperatures differ, contact Technical Support.

The unit is supplied as a mounting kit.

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

Pressure relief valve

Screwed joint

Mounting an oil expansion unit size 39 - 89

Additional information on the SIMOGEAR geared motor

Screwed connection

12.3 Specific data gearbox

at the uppermost hole of the gearbox