Siemens SINAMICS G115D Operating Instructions Manual page 49

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

– Method 1 (applicable to all permissible mounting positions)

– Method 2 (applicable only to the mounting position with the heatsink facing upwards)

– Method 3 (applicable only to the mounting position with the cable outlets facing

Further information

For more information about the SINAMICS G120 Smart Access and the SAM interface kit, see

SINAMICS G120 Smart Access Operating Instructions.

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

Attach the G120 Smart Access to a metallic plate via one magnetic side of the SAM

interface kit and then connect the SAM interface kit cable to the USB interface on the

Snap the rubber support of the SAM interface kit onto the converter heatsink and then

connect the SAM interface kit cable to the USB interface on the converter.

Snap the rubber support of the SAM interface kit onto the PROFINET cable or the I/O cable

connected to the converter and then connect the SAM interface kit cable to the USB

interface on the converter.

4.2 Mounting the optional components