Siemens SINAMICS G115D Operating Instructions Manual page 346

Advanced commissioning
7.31 Activating licensed functions
7. Click "Next".
If licenses are already assigned to your software, they are displayed here.
8. Click "Next".
9. Progress display: "Select licenses".
The WEB License Manager displays the licenses that you can assign. Select the checkbox for
assignment.
10.Click "Next".
11.Progress display: "Assign licenses".
The WEB License Manager displays a summary of the licenses selected for assignment.
12.Click "Assign".
13.Confirm the following confirmation prompt with OK.
14.Progress display: "Generate license key".
The licenses are permanently assigned to the specified memory card. The license key is
displayed.
15.Save the license key on your PC.
You have created a license key.
❒
Displaying and requesting the license key using the "WEB License Manager"
With this function, the WEB License Manager displays which converter functions are assigned to
which card with which license keys.
Requirement
One of the following requirements must be satisfied:
• You know the serial number of the memory card
• You know the license number of the converter function
Procedure
1. Open the WEB License Manager.
2. Select "Show license key"
3. In the drop-down list, make the entry based on the license key you wish to display or request.
4. Complete the fields below appropriately.
344
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA