Siemens SINAMICS G115D Operating Instructions Manual page 343

Selecting the number of drive data sets
Parameter p0180 defines the number of drive data sets (1 ... 4).
Parameter
p0010 = 0
p0010 = 15
p0180
Copying the drive data sets
Parameter
p0819[0]
p0819[1]
p0819[2] = 1
Parameters
Parameter
p0010
r0051.0...1
p0180
p0819[0...2]
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Description
Drive commissioning parameter fil‐
ter
CO/BO: Drive data set DDS effective Displays the effective Drive Data Set (DDS).
Number of Drive data set (DDS)
Copy drive data set DDS
Advanced commissioning
7.30 Switchover between different settings
Description
Drive commissioning: Ready
Drive commissioning: Data sets
Drive data set (DDS) number
Description
Source drive data set
Target drive data set
Starts the copy operation
Setting
Sets the parameter filter to commission a drive.
0: Ready
1: Quick commissioning (factory setting)
15: Data sets
p0180 = 1, 2, 3 or 4
Factory setting: 1
[0] Source Drive Data Set
[1] Target Drive Data Set
[2] 0→1: Starts the copy operation
Factory setting: 0
341