Siemens SINAMICS G115D Operating Instructions Manual page 116

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Commissioning

6.4 Quick commissioning

Reattach the screws with a tightening torque of 2.5 Nm (22.1 lbf.in).

Function description

You can use the DIP switches to perform basic commissioning and functional settings without

using additional commissioning tools.

When the DIP switches are in the OFF position (by default), the value of the function is

defined by the value of the according parameter(s) (see tables below). If the DIP switch is

activated for a specific function, then the parameter(s) for that function cannot be modified

by manually editing the parameter value.

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA