Rating Plate; Surface Treatment; General Information On Surface Treatment - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
12.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
12.1.2

Rating plate

The rating plate of the gearbox or geared motor is printed on a labeled polyester film or
optionally on a stainless steel rating plate. The rating plate is glued using a special masking film.
The film ensures permanent resistance to UV radiation and media of all kinds, such as oils,
greases, salt water and cleaning agents.
The adhesive and material ensure firm adhesion and long-term readability throughout the
operating temperature range of the gearbox and geared motor.
The edges of the rating plate are paint-finished to match the color of the gearbox or motor to
which it is affixed.
12.1.3

Surface treatment

12.1.3.1

General information on surface treatment

All paint finishes are sprayed on.
Danger due to electrostatic discharge
For paint finishes in explosion group III, the paint can be electrostatically charged as a result of
intensive dust turbulence or processes with high levels of electrostatic charging.
Risk of explosion as a result of processes with high levels of electrostatic charging
Minimize the risk of electrostatic charging by applying effective measures according to
IEC 60079-32-1.
NOTICE
Failure of the external protection
If the paint finish is damaged, the geared motor may corrode.
Do not damage the paint finish.
Note
Information about the ability to be repainted does not guarantee the quality of the paint product
supplied by your supplier.
Only the paint manufacturer is liable for the quality and compatibility.
Note
C1 paints are not suitable for ambient air temperatures below ‑20 °C.
428
WARNING
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA