Writing The License Key To The Card - Siemens SINAMICS G115D Operating Instructions Manual

5. Click the "Display license key" button.
6. Enter your e-mail address and click "Request license report".
7. You receive the license report as a PDF. In addition to the actual license key, it includes the
serial number of the memory card and all of the licenses assigned to this memory card.
You have displayed and requested the license key.
❒
A new license is not required if you upgrade/downgrade to older or newer software
versions. For this reason, do not delete the license key from the memory card
(..\KEYS\SINAMICS\KEYS.txt), if you want to switch over to another software version.
7.31.3

Writing the license key to the card

Overview
You write the license key to the memory card by writing the individual positions – in an
ascending order – into the bits of parameter p9920, and then subsequently activate the key
using p9921.
The procedure for Startdrive and BOP-2, based on the fictitious "E1MQ-4BEA" license key, is
described below.
Note
If you subsequently purchase an additional license, then you will require a new license key. You
must overwrite the old license key. The new license key can have more than 9 positions.
You must set p9920[0] = 0 in order to reset the license key.
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Advanced commissioning
7.31 Activating licensed functions
345