Siemens SINAMICS G115D Operating Instructions Manual page 48

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

4.2 Mounting the optional components

1. Mount the SAM interface kit to the SINAMICS G120 Smart Access and fix the two tightening

screws to the prescribed torque (0.8 Nm, 0.6 lbf.in) by using a flat-bit screwdriver or a cross-

tip screwdriver.

2. Remove the commissioning cover (

Reattach the commissioning cover with a tightening torque of 2.5 Nm (22.1 lbf.in).

3. Choose one of the following three methods according to the applicable converter mounting

position to connect the G120 Smart Access fitted with the SAM interface kit to the converter:

) from the G115D converter by using an S12 hex nut

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA