Siemens SINAMICS G115D Operating Instructions Manual page 163

No.
4
5
6
7
Explanation of No. 5 of the previous table
Byte Bit
1
2
Assembly Object, Instance Number: 4 hex
Supported services
Class
Class Attribute
No.
1
2
3
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Service Type Name
get UINT16 Revision
get UINT16 Status
get UINT32 Serial number
get Short Product name
String
Name
0 Owned
1
2 Configured
3
4 ... 7 Extended Device
Status
8 ... 11
12 ... 15
• Get Attribute single
Service Type
get UINT16
get UINT16
get UINT16
Value/explanation
The versions should match the EDS file
See the following table
bits 0 ... 19: consecutive number;
bits 20 ... 23: Production identifier
bits 24 ... 27: Month of manufacture (0 = Jan, B = Dec)
Bits 28 ... 31: Year of manufacture (0 = 2002)
Max. length 32 bytes
Description
0: Converter is not assigned to any master
1: Converter is assigned to a master
Reserved
0: Ethernet/IP basic settings
1: Modified Ethernet/IP settings
For G120, always = 1
Reserved
0: Self-test or status not known
1: Firmware update active
2: At least one I/O connection with error
3: No I/O connections
4: Incorrect configuration in the ROM
5: Fatal fault
6: At least one I/O connection is active
7: All I/O connections in the quiescent state
8 ... 15: Reserved
Not used
Reserved
Instance
Name
Revision
Max Instance
Num of Instances
Advanced commissioning
7.6 Drive control via Ethernet/IP
• Get Attribute single
• Set Attribute single
161