Additional information on the SIMOGEAR geared motor
11.1 General information geared motor
Paint system
Corrosiveness category C4 for high environmental stress
2-component epoxy zinc phosphate base
coat,
2-component polyurethane top coat
Corrosiveness category C5 for very high environmental stress
2-component epoxy zinc phosphate base
coat,
2-component polyurethane intermediate
coat,
2-component polyurethane top coat
In case of corrosiveness category C1, overpainting with a 1-component hydrosystem after
prior rubbing down is possible.
In case of corrosiveness categories C2 to C5, overpainting with 2-component polyurethane
paint, 2-component epoxide paint and 2-component acrylic paint after prior rubbing down is
possible.
11.1.6.3
Primed version
Table 11- 2
Paint system
Unpainted corrosiveness category C1
Cast iron parts immersion primed,
steel parts primed or zinc-plated,
aluminum and plastic parts untreated
Primed according to corrosiveness category C2 G
2-component epoxy zinc phosphate,
desired coat thickness 60 μm
358
Primer according to corrosiveness category
Description
•
Indoor and outdoor installation
•
Chemical plants, swimming pools, wastewater treat-
ment plants, electroplating shops, and boathouses
above seawater
•
Industrial areas and coastal areas with moderate salt
levels
•
Resistance to greases, mineral oils, aliphatic solvents,
sulfuric acid (10 %), caustic soda (10 %)
•
Indoor and outdoor installation
•
Buildings and areas with almost constant condensa-
tion and high contamination, e.g. malt factories and
aseptic areas
•
Industrial areas with high humidity and aggressive
atmosphere, coastal areas and offshore environments
with high salt levels
•
Resistance to greases, mineral oils, aliphatic solvents,
sulfuric acid (10 %), caustic soda (20 %)
Can be overpainted with
•
Synthetic paint, synthetic resin paint, oil paint
•
2-component polyurethane paint
•
2-component epoxy paint
•
2-component - polyurethane paint
•
2-component - epoxy paint
•
2-component - acrylic paint
•
Acid-hardening paint
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
SINAMICS G115D distributed drive