Fastening For Suspended Transport; Storage - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
12.2 Specific data motor
12.2.6

Fastening for suspended transport

Motors may come loose during transport if not adequately secured
Do not use the integrally cast lifting eyes
to the risk of breaking. Only use the integrally cast eyebolts
mounting or following removal.
If necessary, use additional, suitable lifting accessories for transport or during installation.
When attaching by a number of chains and ropes just two strands must be sufficient to bear the
entire load. Secure lifting equipment so that it cannot slip.
①
Figure 12-5
12.2.7

Storage

Injuries caused by falling objects
Danger of serious injuries caused by falling objects.
NOTICE
Failure of the exterior protection
Mechanical damage, chemical damage and thermal damage, such as scratches, acids, alkalis,
sparks, welding beads and heat cause corrosion.
Do not damage the paint finish.
Note
Danger of damage to the motor when stacked
Do not stack gearboxes or geared motors on top of each other.
Unless contractually agreed otherwise, the warranty period for the standard preservative
lasts 6 months from the date of delivery.
450
WARNING
Integrally cast eye on the motor
Motor attached for suspended transport
WARNING
①
on the motor to transport the geared motors due
①
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
to transport the motor prior to