Know-How Protection - Siemens SINAMICS G115D Operating Instructions Manual
Distributed drive for conveyor applications
Hide thumbs
Also See for SINAMICS G115D:
- Operating instructions manual (552 pages) ,
- Operating instructions manual (522 pages)
Table of Contents
Advertisement
Data backup and series commissioning
8.5 Know-how protection
Parameter
p0970
p0971
p0972
p2111
p3950
p3981
p3985
p7761
p8805
p8806[0...53
]
p8807[0...15
]
p8808[0...53
]
p8809[0...53
]
p9400
p9484
For more information about those parameters, see the List Manual.
8.5
Know-how protection
Overview
Know-how protection prevents unauthorized reading of the converter settings.
To protect your converter settings against unauthorized copying, in addition to know-how
protection, you can also activate copy protection.
Precondition
Know-how protection is applicable for the following user interfaces:
• Startdrive PC tool
• Parameter changes via fieldbus
362
Description
Reset drive parameters
Save parameters
Drive unit reset
Alarm counter
Service parameter
Acknowledge drive object faults
Master control mode selection
Write protection
Identification and Maintenance 4
Configuration
Identification and Maintenance 1
Identification and Maintenance 2
Identification and Maintenance 3
Identification and Maintenance 4
Safely remove memory card
BICO interconnections search sig‐
nal source
Setting
The parameter is used to initiate the reset of the
drive parameters.
Setting to save parameters in the non-volatile mem‐
ory.
Sets the required procedure to execute a hardware
reset for the drive unit.
Number of alarms that have occurred after the last
reset.
For service personnel only.
Setting to acknowledge all active faults of a drive
object.
Sets the mode to change over the master control /
LOCAL mode.
Setting for activating/deactivating the write protec‐
tion for adjustable parameters.
Sets the configuration for the content of identifica‐
tion and maintenance 4 (I&M 4, p8809).
Parameters for the PROFINET data set "Identifica‐
tion and Maintenance 1" (I&M 1).
Parameters for the PROFINET data set "Identifica‐
tion and Maintenance 2" (I&M 2).
Parameters for the PROFINET data set "Identifica‐
tion and Maintenance 3" (I&M 3).
Parameters for the PROFINET data set "Identifica‐
tion and Maintenance 4" (I&M 4).
Setting and display when memory card is "removed
safely".
Sets the signal source (BO/CO parameter, BICO co‐
ded) to search in the signal sinks.
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Advertisement
Table of Contents
