Display Stp Abnormal-Port - HP E4510-48G Command Reference Manual

Field
Protection Type
MST BPDU Format
Port Config-
Digest-Snooping
Rapid transition
Num of Vlans Mapped
PortTimes
BPDU Sent
BPDU Received
MSTI RegRoot/IRPC
MSTI RootPortId
MSTI Root Type
Master Bridge
Cost to Master
TC received
Protocol Status
Protocol Std.
Version
CIST Bridge-Prio.
MAC address
Max age(s)
Forward delay(s)
Hello time(s)
Max hops

display stp abnormal-port

Syntax
display stp abnormal-port
Protection type on the port, which can be one of the following:
Root: Root guard
Loop: Loop guard
BPDU: BPDU guard
None: No protection
Format of the MST BPDUs that the port can send, which can be legacy
or 802.1s. Config indicates the configured value, and Active indicates
the actual value.
Indicates whether digest snooping is enabled on the port.
Indicates whether the current port rapidly transitions to the forwarding
state.
Number of VLANs mapped to the current MSTI
Major parameters for the port:
Hello: Hello timer
MaxAge: Max Age timer
FWDly: Forward delay timer
MsgAge: Message Age timer
Remain Hop: Remaining hops
Statistics on sent BPDUs
Statistics on received BPDUs
MSTI regional root/internal path cost
MSTI root port ID
MSTI root type, which can be primary root or secondary root
MSTI root bridge ID
Path cost from the MSTI to the master bridge
Number of received TC BPDUs
MSTP protocol status
MSTP protocol standard
MSTP protocol version
Device priority in the CIST
MAC address of the device
Aging timer for BPDUs (in seconds)
Port state transition delay (in seconds)
Interval for the root bridge to send BPDUs (in seconds)
Maximum hops in the MSTI
4-8
Description