Qos Wrr Group Sp - HP 6125G Command Reference Manual

Acl and qos command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Before using this command to configure weights for queues, make sure that byte-count WRR queuing is
enabled on the interface. Otherwise, the weight configuration does not take effect.
Related commands: display qos wrr interface and qos wrr.
Examples
# Enable byte-count WRR queuing on GigabitEthernet 1/0/1, and assign queue 0, with the scheduling
weight 10, to WRR group 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr byte-count
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group 1 byte-count 10

qos wrr group sp

Syntax
qos wrr queue-id group sp
undo qos wrr queue-id group sp
View
Interface view
Default level
2: System level
Parameters
queue-id: Specifies a queue by its ID, which ranges from 0 to 7.
sp: Specifies strict priority (SP) queuing.
Description
Use qos wrr group sp to assign a queue to the strict priority (SP) group on a WRR-enabled interface.
Use undo qos wrr group sp to remove a queue from the SP group on a WRR-enabled interface.
The Switch Series provides eight output queues per port. You can assign some queues on a port to the SP
scheduling group and the others to the WRR scheduling group (group 1) to implement SP+WRR queuing.
The switch schedules packets in the SP scheduling group preferentially, and when the SP scheduling
group is empty, schedules the packets in the WRR scheduling group. Queues in the SP scheduling group
are scheduled with the SP queue scheduling algorithm. Queues in the WRR scheduling group are
scheduled with WRR.
This command is available only on a WRR-enabled interface. Queues in the SP group are scheduled with
SP. The SP group has strict higher scheduling priority than the WRR groups.
Related commands: display qos wrr interface and qos wrr.
Examples
# Enable WRR queuing on GigabitEthernet 1/0/1, and assign queue 0 to the SP group.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group sp
78

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents