Display Ripng Database - HP FlexNetwork 3600 v2 Series Command Reference Manual

Suppress time :
Number of periodic updates sent : 0
Number of trigger updates sent : 0
IPsec policy name: policy001, SPI: 300
Table 53 Command output
Field
Public VPN-instance name
RIPng process
Preference
Checkzero
Default Cost
Maximum number of balanced paths
Update time
Timeout time
Suppress time
Garbage-Collect time
Number of periodic updates sent
Number of trigger updates sent
IPsec policy name
SPI

display ripng database

Syntax
display ripng process-id database [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
120 sec(s) Garbage-Collect time :
267
120 sec(s)
Description
Public VPN instance name.
RIPng process ID.
RIPng preference.
Indicates whether zero field check for RIPng packet
headers is enabled.
Default metric of redistributed routes.
Maximum number of load balanced routes.
RIPng update interval, in seconds.
RIPng timeout interval, in seconds.
RIPng suppress interval, in seconds.
RIPng garbage collection interval, in seconds.
Number of periodic updates sent.
Number of triggered updates sent.
IPsec policy applied in the process.
SPI defined in the IPsec policy.