Display Lacp System-Id; Display Link-Aggregation Load-Sharing Mode - HP E4510-48G Command Reference Manual

Examples
# Set the description of interface Bridge-aggregation 1 to link-aggregation interface.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description link-aggregation interface

display lacp system-id

Syntax
display lacp system-id
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display lacp system-id command to display the system ID of the local system (that is, the
actor).
The system ID comprises the system LACP priority and the system MAC address.
You can use the lacp system-priority command to change the LACP priority of the local system.
When you do that, the LACP priority value you specify in the command is in decimal format. However,
it is displayed as a hexadecimal value with the display lacp system-id command.
Related commands: lacp system-priority.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 00e0-fc00-0100
Table 2-1 display lacp system-id command output description
Field
Actor System ID: 0x8000,
00e0-fc00-0100

display link-aggregation load-sharing mode

Syntax
display link-aggregation load-sharing mode [ interface [ bridge-aggregation interface-number ] ]
The local system ID, which comprises the LACP system priority
(0x8000 in this sample output) and the system MAC address
(00e0-fc00-0100 in this sample output).
2-2
Description