Display Packet-Drop Interface; Display Packet-Drop Summary - HP E4510-48G Command Reference Manual

display packet-drop interface

Syntax
display packet-drop interface [ interface-type [ interface-number ] ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type: Type of a specified interface.
interface-number: Number of a specified interface.
Description
Use the display packet-drop interface command to display information about dropped packets on an
interface or multiple interfaces.
If you do not specify an interface type or interface number, this command displays information
about dropped packets on all the interfaces on the device.
If you specify an interface type only, this command displays information about dropped packets on
the specified type of interfaces.
If you specify both the interface type and interface number, this command displays information
about dropped packets on the specified interface.
Examples
# Display information about dropped packets on GigabitEthernet 1/0/1.
<Sysname> display packet-drop interface GigabitEthernet 1/0/1
GigabitEthernet1/0/1:
Packets dropped by GBP full or insufficient bandwidth: 301
Packets dropped by FFP: 261
Packets dropped by STP non-forwarding state: 321

display packet-drop summary

Syntax
display packet-drop summary
View
Any view
Default Level
1: Monitor level
Parameters
None
1-11