Display Ripng Database - HP 5920 Series Command Reference Manual

Layer 3 - ip routing
Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

Number of trigger updates sent: 1
Table 100 Command output
Field
Public VPN-instance name/Private VPN-instance
name
RIPng process
Preference
Checkzero
Default Cost
Maximum number of balanced paths
Update time
Timeout time
Suppress time
Garbage-Collect time

display ripng database

Use display ripng database to display all active routes in the advertising database for a RIPng process.
RIPng advertises active routes in RIPng routing updates.
Syntax
display ripng process-id database [ ipv6-address prefix-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6
address. The prefix-length argument specifies a prefix length in the range of 0 to 128.
Examples
# Display active routes for RIPng process 100.
<Sysname> display ripng 100 database
1::/64,
cost 0, RIPng-interface
10::/32,
cost 0, imported
2::2/128,
via FE80::20C:29FF:FE7A:E3E4, cost 1
Description
Public network or VPN where the RIPng process runs.
RIPng process ID.
RIPng preference.
Indicates whether zero field check for RIPng packet
headers is enabled.
Default metric of redistributed routes.
Maximum number of load-balanced routes.
RIPng update interval, in seconds.
RIPng timeout interval, in seconds.
RIPng suppress interval, in seconds.
RIPng garbage collection interval, in seconds.
421

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 series

Table of Contents