Flow-Interval; Group-Member - HP E4510-48G Command Reference Manual

[Sysname] interface GigabitEthernet 1/0/1
[Sysname- GigabitEthernet1/0/1] flow-control

flow-interval

Syntax
flow-interval interval
undo flow-interval
View
Ethernet port view
Default Level
2: System level
Parameters
interval: Interval at which the interface collects statistics. It ranges from 5 to 300 seconds and must be
a multiple of 5. The default value is 300 seconds.
Description
Use the flow-interval command to configure the time interval for collecting interface statistics.
Use the undo flow-interval command to restore the default interval.
Examples
# Set the time interval for collecting interface statistics to 100 seconds.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] flow-interval 100

group-member

Syntax
group-member interface-list
undo group-member interface-list
View
Port group view
Default Level
2: System level
Parameters
interface-list: Ethernet port list, in the form of interface-type interface-number [ to interface-type
interface-number ] &<1-10>, where &<1-10> indicates that you can specify up to 10 port or port
ranges.
1-17