Display Stp Abnormal-Port - HP 6125G Command Reference Manual

Field
Forward delay(s)
Hello time(s)
Max hops

display stp abnormal-port

Syntax
display stp abnormal-port [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display stp abnormal-port to display information about ports blocked by spanning tree protection
functions.
Examples
# In MSTP mode, display information about ports blocked by spanning tree protection functions.
<Sysname> display stp abnormal-port
MSTID
1
2
2
Table 25 Command output
Field
Blocked Port
Description
Port state transition delay (in seconds).
Interval (in seconds) for the root bridge to send BPDUs.
Maximum hops in the MSTI.
Blocked Port
GigabitEthernet1/0/1
GigabitEthernet1/0/2
GigabitEthernet1/0/3
Description
Name of a blocked port, which corresponds to the related MSTI.
Reason
ROOT-Protected
LOOP-Protected
Formatcompatibility–Protected
94