Display Stp Abnormal-Port - HP 3600 v2 Series Command Reference Manual

Field
MST BPDU Format
Port Config-
Digest-Snooping
Rapid transition
Num of Vlans Mapped
PortTimes
BPDU Sent
BPDU Received
MSTI RegRoot/IRPC
MSTI RootPortId
MSTI Root Type
Master Bridge
Cost to Master
TC received
Protocol Status
Protocol Std.
Version
Bridge-Prio.
Max age(s)
Forward delay(s)
Hello time(s)
Max hops

display stp abnormal-port

Syntax
display stp abnormal-port [ | { begin | exclude | include } regular-expression ]
Description
Format of the MST BPDUs that the port can send, which can be legacy or 802.1s.
•
Config—Configured value.
•
Active—Actual value.
Status of Digest Snooping on the port.
The port rapidly transits to the forwarding state or not in the MSTI or VLAN.
Number of VLANs mapped to the MSTI.
Major parameters for the port:
•
Hello—Hello timer.
•
MaxAge—Max Age timer.
•
FwDly—Forward delay timer.
•
MsgAge—Message Age timer.
•
RemHop—Remaining hops.
Statistics on sent BPDUs.
Statistics on received BPDUs.
MSTI regional root/internal path cost.
MSTI root port ID.
MSTI root type, which can be primary root or secondary root.
MSTI root bridge ID.
Path cost from the MSTI to the master bridge.
Number of received TC BPDUs.
Spanning tree protocol status.
Spanning tree protocol standard.
Spanning tree protocol version.
In MSTP mode, this field indicates the device's priority in the CIST. In PVST mode,
this field indicates the device's priority in VLAN 1.
Aging timer (in seconds) for BPDUs. In PVST mode, this field is the configuration
in VLAN 1.
Port state transition delay (in seconds). In PVST mode, this field is the
configuration in VLAN 1.
Interval (in seconds) for the root bridge to send BPDUs. In PVST mode, this field is
the configuration in VLAN 1.
Maximum hops in the MSTI.
112