Display Stp Abnormal-Port - HP A5830 Series Command Reference Manual

Field
MSTI RootPortId
MSTI Root Type
Master Bridge
Cost to Master
TC received
Protocol Status
Protocol Std.
Version
Bridge-Prio.
Max ages
Forward delays
Hello times
Max hops

display stp abnormal-port

Description
Use the display stp abnormal-port command to display information about ports blocked by spanning tree
protection functions.
Syntax
display stp abnormal-port [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
MSTI root port ID.
MSTI root type, which can be primary root or secondary root.
MSTI root bridge ID.
Path cost from the MSTI to the master bridge.
Number of received TC BPDUs.
Spanning tree protocol status.
Spanning tree protocol standard.
Spanning tree protocol version.
In MSTP mode, this field indicates the device's priority in the CIST. In PVST
mode, this field indicates the device's priority in VLAN 1.
Aging timer (in seconds) for BPDUs. In PVST mode, this field is the
configuration in VLAN 1.
Port state transition delay (in seconds). In PVST mode, this field is the
configuration in VLAN 1.
Interval (in seconds) for the root bridge to send BPDUs. In PVST mode, this field
is the configuration in VLAN 1.
Maximum hops in the MSTI.
99