Renault Laguna III Manual page 3409

NON-SIDE OPENING ELEMENTS
ADJUSTMENT VALUES
a For information on the adjustment values for the
bonnet, (see Vehicle panel gaps: Adjustment val-
ue) (MR 416, 01C, Vehicle bodywork specifica-
tions).
ADJUSTMENT
a There are two options for adjusting the bonnet:
- by means of the bonnet mounting bolts,
- by means of the bonnet hinge mounting bolts: this
operation requires the removal of the front wing
and the front wing upper mounting bracket.
The bonnet striker must be adjusted in addition to
the bonnet adjustment.
a Observe the adjustment sequence.
Bonnet: Adjustment
122804
48A-3
a Symbols A, B, C and D show the adjustment op-
tions.
The black dot in the centre represents the body of
the bolt.
The grey section represents the component to be
adjusted.
The white section represents the adjustment area.
48A
109496