Renault Laguna III Manual page 3367

Rear end panel assembly: Description
B91
No. Description
(1) Rear end panel
lining
(2) Boot lid striker
panel mounting
(3) Rear end panel
cross member
(4) Rear end panel
(5) Rear end cross
member exterior
flange
II - PART IN POSITION
Complete replacement
REAR UPPER STRUCTURE
Type Thick-
ness (mm)
HEL 1
Mild 1.2
steel
HEL 1
Mild 0.7
steel
Mild 2
steel
122005
Special notes during removal
When removing the rear end panel assembly, gently lift
the corners (6) of the right and left-hand rear wing pan-
els to ease removal.
WARNING
If the mating faces of the parts to be welded are not
accessible, make EGW plug welds to replace the
original resistance welds (see MR 400).
Note:
For a detailed description of a particular connec-
tion, see MR 400.
44A-47
44A
122007