Renault Laguna III Manual page 3347

Inner rear wheel arch: General description
B91 or D91 or K91
IMPORTANT
Use a repair bench to ensure the positioning of the
points and the geometry of the axle assemblies.
Note:
The information contained in the following
describes the general repair procedure for all vehi-
cles having the same design for this part.
Before reading the following general information,
make sure that there are no special notes associ-
ated with the vehicle. These special notes are spec-
ified if necessary in other parts of the sub-section
dealing with the component.
Note:
For a detailed description of a particular connec-
tion, see MR 400.
DESIGN OF THE STRUCTURAL COMPONENT
The special feature of this part is that is combines the
functions of the rear inner wheel arch and the rear
shock absorber mounting.
If there are other issues regarding access to mating
faces, the various replacement options are described
in the basic instructions for structural bodywork repair
(see MR 400).
REAR UPPER STRUCTURE
121041
44A-27
44A