Renault Laguna III Manual page 3408

NON-SIDE OPENING ELEMENTS
2 - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the bolts (4) ,
- the bonnet.
IV - REFITTING BY MEANS OF THE BONNET
HINGE BOLTS
1 - OPERATION FOR REFITTING PART
CONCERNED
a Refit:
- the cover,
- the bolts (4) .
a Adjust the opening clearances and flush fitting (see
48A, Non-side opening elements, Bonnet: Ad-
justment, page 48A-3) .
2 - FINAL OPERATION
a Clip on the pipe at (2) .
a Connect the pipe (1) .
a Refit:
- the front wing upper mounting supports,
- the front wing (see 42A, Front upper structure,
Front wing: Removal - Refitting, page 42A-3) ,
- the halogen headlights (see Halogen headlight:
Removal - Refitting) (80B, Headlights),
Bonnet: Removal - Refitting
122795
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the front wheel arch liner (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion).
48A-2
48A