Renault Laguna III Manual page 3322

Rear wing panel: General description
B91 or D91 or K91
This part is a distinct component of the body side. It
can be disassembled without a partial cut.
II - AREA TO BE CUT FOR PARTIAL
REPLACEMENT
B91
Lines (1) and (2) in the drawing show the areas in
which it is possible to carry out a partial replacement.
REAR UPPER STRUCTURE
110611
K91
Lines (6) in the drawing show the areas in which it is
possible to carry out a partial replacement.
III - ASSEMBLY METHOD FOR A PARTIAL
REPLACEMENT
Only the connections which are specific to the partial
replacement by cutting are indicated.
WARNING
If the mating faces of the parts to be welded are not
accessible, make EGW plug welds to replace the
original resistance welds (see MR 400).
If there are other issues regarding access to mating
faces, the various replacement options are described
in the basic instructions for structural bodywork repair
(see MR 400).
44A-2
44A
118915