Renault Laguna III Manual page 3396

ADJUSTMENT VALUES
a For information on the front side door adjustment
values, (see Vehicle panel gaps: Adjustment val-
ue) (MR 416, 01C, Vehicle bodywork specifica-
tions).
ADJUSTMENT
a There are two options for adjusting the door:
- by means of the mountings on the door box section
(opening clearance adjustment),
- by means of the mountings on the A-pillar (shut line
adjustment): the front wing needs to be removed
for this operation.
a Observe the adjustment sequence.
SIDE OPENING ELEMENTS
Front side door: Adjustment
123265
a
Symbols A, B, C and D show the adjustment
options.
The black dot in the centre represents the body
of the bolt.
The grey section represents the component to be
adjusted.
The white section represents the adjustment
area.
I - ADJUSTMENT OF OPENING CLEARANCES
WITH THE FRONT WING AND THE REAR DOOR
1 - PREPARATION FOR ADJUSTING THE FLUSH
FITTING OF A FRONT SIDE DOOR (1st ASSEMBLY)
a Remove the front wing (see 42A, Front upper
structure, Front wing: Removal - Refitting, page
42A-3) .
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
47A-7
47A
109496