Renault Laguna III Manual page 3371

B91 or D91
No. Description
(1) Rear end panel
(2) Rear end panel
lower cross mem-
ber closure panel
(3) Rear end panel
lower cross mem-
ber
(4) Striker plate sup-
port
(5) Rear end panel
lining
II - PART IN POSITION
WARNING
If the mating faces of the parts to be welded are not
accessible, make EGW plug welds to replace the
original resistance welds (see MR 400).
REAR UPPER STRUCTURE
Rear end panel: Description
Type Thick-
ness (mm)
HLE 1
Mild 0.7
steel
HLE 1
Mild 1.2
steel
HLE 1
122005
III - POSITIONING OF LOCAL ELECTRICAL
EARTHS
IMPORTANT
To avoid damaging the vehicle's electric and elec-
tronic components, the battery and the earths of
any wiring harness near the weld area must be dis-
connected.
Position the welding machine earth as close as
possible to the weld zone (see MR 400).
44A-51
44A
122802
122803