Renault Laguna III Manual page 3407

NON-SIDE OPENING ELEMENTS
I - REMOVAL BY MEANS OF THE BONNET BOLTS
1 - REMOVAL PREPARATION OPERATION
a Disconnect pipe (1)
a Unclip the pipe at (2) .
2 - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the bolts (3) ,
- the bonnet.
Bonnet: Removal - Refitting
122811
122795
II - REFITTING BY MEANS OF THE BONNET BOLTS
1 - OPERATION FOR REFITTING PART
CONCERNED
a Refit:
- the cover,
- the bolts (3) .
a Adjust the opening clearances and flush fitting (see
48A, Non-side opening elements, Bonnet: Ad-
justment, page 48A-3) .
2 - FINAL OPERATION
a Clip on the pipe at (2) .
a Connect the pipe (1) .
III - REMOVAL BY MEANS OF THE BONNET HINGE
BOLTS
1 - REMOVAL PREPARATION OPERATION
a Remove:
- the front wheel arch liner (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the halogen headlights (see Halogen headlight:
Removal - Refitting) (80B, Headlights),
- the front wings (see 42A, Front upper structure,
Front wing: Removal - Refitting, page 42A-3) ,
- the front wing upper mounting supports.
a Disconnect pipe (1)
a Unclip the pipe at (2) .
48A-1
48A